tyre/tire selection

[NaN]

I've implemented new car config code (converted TC6, 360 already). I'd like to have some feedback before checking it in.

The number of wheels/suspensions is fixed to four(will change in the future). There has to be at least one coilover, tire and brake(names can be arbitary). Tire types will be in carparts/tire and tire textures in carparts/tire/textures.

One issue is wheel mass and inertia. I'd tend to put them into tire definition.

TC6:

Code:

[coilover-front]
spring-constant = 72000
bounce = 7500
rebound = 5000
travel = 0.32
anti-roll = 3700

[coilover-rear]
spring-constant = 68000
bounce = 7500
rebound = 5000
travel = 0.32
anti-roll = 8000

[tire]
size = 215/50r16
type = touring
texture = touring

[brake-front]
friction = 0.73
max-pressure = 3.2e6
bias = 0.61
radius = 0.17
area = 0.015
rotor = rotor_worn

[brake-rear]
friction = 0.73
max-pressure = 3.2e6
bias = 0.39
radius = 0.14
area = 0.015
handbrake = 1.1
rotor = rotor_worn

[wheel-0]
orientation = right
position = 0.75, 1.26, -0.43
mass = 20
rim = 5_spoke_m
tire = tire
brake = brake-front

[suspension-0]
coilover = coilover-front
position = 0.66, 1.26, -0.07
hinge = -3.70, 1.1, -0.43
camber = -1.33
caster = 6.12
toe = 0.0

[wheel-1]
orientation = left
position = -0.75, 1.26, -0.43
mass = 20
rim = 5_spoke_m
tire = tire
brake = brake-front

[suspension-1]
coilover = coilover-front
position = -0.66, 1.26, -0.07
hinge = 3.70, 1.1, -0.43
camber = -1.33
caster = 6.12
toe = 0.0

[wheel-2]
orientation = right
position = 0.75, -1.28, -0.43
mass = 20
rim = 5_spoke_m
tire = tire
brake = brake-rear

[suspension-2]
coilover = coilover-rear
position = 0.66, -1.28, -0.07
hinge = -3.70, -1.0, -0.43
camber = -0.45
caster = 0.28
toe = 0.0

[wheel-3]
orientation = left
position = -0.75, -1.28, -0.43
mass = 20
rim = 5_spoke_m
tire = tire
brake = brake-rear

[suspension-3]
coilover = coilover-rear
position = -0.66, -1.28, -0.07
hinge = 3.70, -1.0, -0.43
camber = -0.45
caster = 0.28
toe = 0.0