|
01-22-2008, 07:34 PM,
|
|
|
hoehrer
Junior Member
|
Posts: 9
Threads: 1
Joined: Jan 2008
|
|
there are a lot of sub-directories ... sorry for the bad formatting, i still search for the commandline tool that outputs a nice tree-like directory-structure (forgot the name) 
EDIT This "tree" btw (duh), I just didn't remember to actually install it
Code: ls bullet-2.64/out -R
bullet-2.64/out:
linuxx86
bullet-2.64/out/linuxx86:
optimize
bullet-2.64/out/linuxx86/optimize:
Demos Extras libs src
bullet-2.64/out/linuxx86/optimize/Demos:
AllBulletDemos CcdPhysicsDemo ConcaveDemo DoublePrecisionDemo GjkConvexCastDemo Raytracer
BasicDemo ColladaDemo ConstraintDemo EPAPenDepthDemo MovingConcaveDemo SimplexDemo
BspDemo CollisionDemo ContinuousConvexCollision GenericJointDemo OpenGL UserCollisionAlgorithm
BulletDinoDemo CollisionInterfaceDemo ConvexDecompositionDemo GimpactTestDemo RagdollDemo VehicleDemo
bullet-2.64/out/linuxx86/optimize/Demos/AllBulletDemos:
DemoEntries.o
bullet-2.64/out/linuxx86/optimize/Demos/BasicDemo:
BasicDemo.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/BspDemo:
BspConverter.o BspDemo.o BspLoader.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/BulletDinoDemo:
BulletDino.o
bullet-2.64/out/linuxx86/optimize/Demos/CcdPhysicsDemo:
CcdPhysicsDemo.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/ColladaDemo:
ColladaDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/CollisionDemo:
CollisionDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/CollisionInterfaceDemo:
CollisionInterfaceDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/ConcaveDemo:
ConcavePhysicsDemo.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/ConstraintDemo:
ConstraintDemo.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/ContinuousConvexCollision:
ContinuousConvexCollisionDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/ConvexDecompositionDemo:
ConvexDecompositionDemo.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/DoublePrecisionDemo:
DoublePrecisionDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/EPAPenDepthDemo:
PenetrationTestBullet.o
bullet-2.64/out/linuxx86/optimize/Demos/GenericJointDemo:
GenericJointDemo.o Ragdoll.o
bullet-2.64/out/linuxx86/optimize/Demos/GimpactTestDemo:
GimpactTestDemo.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/GjkConvexCastDemo:
LinearConvexCastDemo.o main.o
bullet-2.64/out/linuxx86/optimize/Demos/MovingConcaveDemo:
ConcavePhysicsDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/OpenGL:
bullet-2.64/out/linuxx86/optimize/Demos/RagdollDemo:
main.o RagdollDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/Raytracer:
main.o Raytracer.o
bullet-2.64/out/linuxx86/optimize/Demos/SimplexDemo:
SimplexDemo.o
bullet-2.64/out/linuxx86/optimize/Demos/UserCollisionAlgorithm:
UserCollisionAlgorithm.o
bullet-2.64/out/linuxx86/optimize/Demos/VehicleDemo:
main.o VehicleDemo.o
bullet-2.64/out/linuxx86/optimize/Extras:
AlternativeCollisionAlgorithms BulletColladaConverter COLLADA_DOM ConvexDecomposition GIMPACT GIMPACTUtils glui LibXML quickstep
bullet-2.64/out/linuxx86/optimize/Extras/AlternativeCollisionAlgorithms:
bullet-2.64/out/linuxx86/optimize/Extras/BulletColladaConverter:
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM:
src
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src:
1.4 dae modules
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src/1.4:
dom
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src/1.4/dom:
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src/dae:
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src/modules:
LIBXMLPlugin stdErrPlugin STLDatabase
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src/modules/LIBXMLPlugin:
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src/modules/stdErrPlugin:
bullet-2.64/out/linuxx86/optimize/Extras/COLLADA_DOM/src/modules/STLDatabase:
bullet-2.64/out/linuxx86/optimize/Extras/ConvexDecomposition:
bullet-2.64/out/linuxx86/optimize/Extras/GIMPACT:
src
bullet-2.64/out/linuxx86/optimize/Extras/GIMPACT/src:
Bullet core
bullet-2.64/out/linuxx86/optimize/Extras/GIMPACT/src/Bullet:
bullet-2.64/out/linuxx86/optimize/Extras/GIMPACT/src/core:
bullet-2.64/out/linuxx86/optimize/Extras/GIMPACTUtils:
bullet-2.64/out/linuxx86/optimize/Extras/glui:
algebra3.o arcball.o glui_bitmap_img_data.o quaternion.o
bullet-2.64/out/linuxx86/optimize/Extras/LibXML:
bullet-2.64/out/linuxx86/optimize/Extras/quickstep:
bullet-2.64/out/linuxx86/optimize/libs:
libboxbox.a libbulletcollision.a libbulletmath.a libcolladadom.a libGIMPACT.a liblibxml.a
libBulletColladaConverter.a libbulletdynamics.a libbulletopenglsupport.a libconvexdecomposition.a libGIMPACTUtils.a libquickstep.a
bullet-2.64/out/linuxx86/optimize/src:
BulletCollision BulletDynamics LinearMath
bullet-2.64/out/linuxx86/optimize/src/BulletCollision:
BroadphaseCollision CollisionDispatch CollisionShapes NarrowPhaseCollision
bullet-2.64/out/linuxx86/optimize/src/BulletCollision/BroadphaseCollision:
bullet-2.64/out/linuxx86/optimize/src/BulletCollision/CollisionDispatch:
bullet-2.64/out/linuxx86/optimize/src/BulletCollision/CollisionShapes:
bullet-2.64/out/linuxx86/optimize/src/BulletCollision/NarrowPhaseCollision:
bullet-2.64/out/linuxx86/optimize/src/BulletDynamics:
ConstraintSolver Dynamics Vehicle
bullet-2.64/out/linuxx86/optimize/src/BulletDynamics/ConstraintSolver:
bullet-2.64/out/linuxx86/optimize/src/BulletDynamics/Dynamics:
bullet-2.64/out/linuxx86/optimize/src/BulletDynamics/Vehicle:
bullet-2.64/out/linuxx86/optimize/src/LinearMath:
|
|
|
|
01-23-2008, 01:47 PM,
|
|
|
hoehrer
Junior Member
|
Posts: 9
Threads: 1
Joined: Jan 2008
|
|
Oh, many thanks. It's funny though, since i could compile fine in the beginning - so scons once found the file.
Aaaanyway, it's compiling now but still pukes in shader.cpp:120 (which I had commented out in my workaround).
I've set shaders = off in the config file.
The code is vanilla trunk Rev: 1919.
Code: SHADER_MANAGER::EndScene (this=0x821d910) at src/shader.cpp:120
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb6c67900 (LWP 3552)]
0x00000000 in ?? ()
(gdb) bt
#0 0x00000000 in ?? ()
#1 0x0810ffb5 in SHADER_MANAGER::EndScene (this=0x821d910) at src/shader.cpp:120
#2 0x08058a86 in GRAPHICS::EndScene (this=0x821d7fc) at src/graphics.cpp:940
#3 0x08062078 in GAME::drawGLScene (this=0x821ba80) at src/game.cpp:889
#4 0x08068c82 in GAME::Start (this=0x821ba80, args=@0xbfecc920) at src/game.cpp:1725
#5 0x08051324 in main (argc=1, argv=0xbfecc9e4) at src/main.cpp:26
(gdb) q
The program is running. Exit anyway? (y or n) y
Werner
|
|
|
|
01-24-2008, 12:53 PM,
|
|
|
hoehrer
Junior Member
|
Posts: 9
Threads: 1
Joined: Jan 2008
|
|
Many thanks! It compiles and runs perfectly now 
I compiled it with trunk (Revision: 1921) with "shaders = off" and played a quick game. I didn't see any problems so far (except for my inability to steer, but that's another matter altogether  - gotta get rid of my NFS II steering habit )
@Camarox: you should try it again as well, i think you'll get no problems too.
Werner
|
|
|
|
02-14-2008, 04:48 AM,
|
|
|
Dan Mor
Junior Member
|
Posts: 1
Threads: 0
Joined: Feb 2008
|
|
Under windowsXP, following instructions http://wiki.vdrift.net/Compiling#VDrift
i have:
Code: Ф¬ÐÂÐбва в®а@COMP /d/v
$ scons
scons: Reading SConscript files ...
UnicodeDecodeError: 'ascii' codec can't decode byte 0x80 in position 26: ordinal not in range(128):
File "D:\v\SConstruct", line 339:
Note: The options you enter will be saved in the file vdrift.conf and they will be the defaults which are used every subsequent time you run scons.""" % opts.GenerateHelpText(env))
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Script\SConscript.py", line 594:
env = self.factory()
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Script\SConscript.py", line 574:
default_env = SCons.Defaults.DefaultEnvironment()
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Defaults.py", line 89:
_default_env = apply(SCons.Environment.Environment, args, kw)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Environment.py", line 889:
apply_tools(self, tools, toolpath)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Environment.py", line 101:
env.Tool(tool)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Environment.py", line 1516:
tool(self)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\__init__.py", line 175:
apply(self.generate, ( env, ) + args, kw)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\default.py", line 41:
SCons.Tool.Tool(t)(env)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\__init__.py", line 175:
apply(self.generate, ( env, ) + args, kw)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\mslink.py", line 204:
include_path, lib_path, exe_path = SCons.Tool.msvc.get_msvc_paths(env,version)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\msvc.py", line 564:
include_path = get_msvc_path(env, "include", version)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\msvc.py", line 349:
return _get_msvc8_path(path, str(version_num), platform, suite)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\msvc.py", line 291:
dirs = _parse_msvc8_overrides(version, platform, suite)
File "C:\Python25\Lib\site-packages\scons-0.97.0d20071212\SCons\Tool\msvc.py", line 194:
settings_path = settings_path.replace(r'%' + env_var + r'%', env_vars[env_var])
what i must do? 
|
|
|
|
