Joystick help

[uldics]

I have 4 axes and 14 buttons (including 4 way pow hat), all buttons are digital (2 positions - pressed or not pressed).
I kinda solved my axes problem with some axes after a lot of trying got assigned, the rest I wrote manually in config file, because assigning is almost random(not after my will). But now I can drive with joystick. One problem still is there: I have steering set to when I roll my joystick (left right), but it does not give full result (only about 80-90% of full scale) - I can only get full steering at max, when I roll AND twist my joystick. Twisting I have nothing about in my config nor have I assigned it to nothing. Just to add, that axes names in calibration and assigning menus are not the same - that was my first problem. Now I know what axes are where and it works.
It is still jumpy in menus, sometimes setting some settings before I can get out of current menu (recording race, steering compensation, deadzones, auto clutch - all what can be assigned just by moving with axes, not pushing any buttons).
Boxes in calibration screen are almost from top and left side to a bit over middle. And shape is square. And there is white left after no more expanding.
~/.vdrift/calibration file is:
# VDrift joystick calibration file.
#Each line is an axis with the format [min] [max]

-0.824768 0.206177
-0.876312 0.195862
-0.969086 0.144318
-0.979401 0.329895
-0.1 0.1
-0.1 0.1
-0.1 0.1
And I want joystick, button steering is almost impossible with powerful engines, spinning at max and no traction --> no control. But thanks for the tip.