|
RE: Engine max power
max-power = 1.79e5 # 179 kW or 240 hp
The max-power parameter is not used by the simulation, only used in the specs display, should be calculated from torque.
For more power you will want to modify the torque-curve (rpm, Nm):
...
torque-curve-08 = 4200, 221
...
To get 30% more power, scale the second value of all torque points by 1.30:
torque-curve-08 = 4200, 287 # 221 * 1.3
displacement = 2.0E-3 # 2 liter engine
Displacement is only used to calculate engine friction, affects how torque drops when not at full throttle. Probably best to leave it as is, use real world values.
The most simple way to play with drifting is probably to modify the track friction (simulate wet surface) in track surfaces.txt, modify:
FrictionNonTread = 0.5
FrictionTread = 0.3
It is not exactly how a wet surface would feel like, but you should slide a lot more.
EDIT:
max-power is also used to calculate top speed, select speedometer
|
