+- Forums (https://www.vdrift.net/Forum)
+-- Forum: Community (https://www.vdrift.net/Forum/forumdisplay.php?fid=3)
+--- Forum: Bugs (https://www.vdrift.net/Forum/forumdisplay.php?fid=7)
+--- Thread: Dead zone not applied to brake/throttle (/showthread.php?tid=43)
Dead zone not applied to brake/throttle - thelusiv - 07-21-2005
When I let go of the gas on my gamepad sometimes the brakes will come on, sometimes they will flash on and off quickly. This tells me that maybe the joystick dead zone isn't being applied here.
Dead zone not applied to brake/throttle - joevenzon - 07-21-2005
Are you using your gamepad's d-pad, or is it an analog control?
Dead zone not applied to brake/throttle - thelusiv - 07-21-2005
Regular analog axis. The D-pad on my controller is actually all hardware, it is an axis that goes from 0 to 1 with no in between values. Enabling it (via a button on the gamepad) disables the left analog stick.
Dead zone not applied to brake/throttle - joevenzon - 07-21-2005
you should bring up the joyinfo screen with j and see if the brake axis is flashing between 0 and 1 or if it's flashing between 0 and 0.01 or something
Dead zone not applied to brake/throttle - thelusiv - 07-21-2005
It's between 0.000 and 0.02... and -0.03...the 5% deadzone setting should cut that off.
Dead zone not applied to brake/throttle - joevenzon - 07-23-2005
Hmm, the code looks like it should be working fine... do all of the deadzone settings result in the brakelights activating?
Dead zone not applied to brake/throttle - thelusiv - 07-24-2005
Hmmm...with the current dev version I can't make it do it anymore, on any deadzone setting.